Difference between revisions of "Fiber Splicing"
(→Fibers) |
(→Fibers) |
||
| Line 31: | Line 31: | ||
====Fibers==== | ====Fibers==== | ||
| − | |||
* [[private:fiber_properties_datasheets|Properties of polystyrene]] | * [[private:fiber_properties_datasheets|Properties of polystyrene]] | ||
Revision as of 21:26, 20 November 2012
Equipment
Splicing Unit
A close-up of the ferrules, collars, and heating lamp of the fiber splicing machine
A side view, for perspective
Ferrules
The ferrules are made of quartz, and are V shaped so that they make a hollow square cross-section when mated. This is so the fiber fits between them snugly while it is being fused.
A 2x2 mm square waveguide, 2 ferrules, and heat-shrink used to mount the ferrules and supports to the collars. The black residue on one of the ferrules is RTV and it is used in mounting ferrules to the collars.
Splicing Collars
Prototype collars designed for small round fibers. The top and bottom collars seem to be identical.
The supports and rounded ferrule are mounted.
Top collar, with ferrule and support mounted (machined specifically to mount 2x2mm square fibers).
Bottom collar, with ferrule and support mounted (machined specifically to mount 2x2mm square fibers).
Fibers
Lamp
- The lamp used in the fiber splicing unit is a 25 volt - 250 watt AV/Photo lamp.
Setup
Results
- Testing
- New Collar Design