Difference between revisions of "List of Board Changes"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
Here is a list of changes made to the boards received from Sierra Circuits. | Here is a list of changes made to the boards received from Sierra Circuits. | ||
| − | *Board | + | = Board 1 = |
| − | * | + | |
| − | * | + | *Individual channel 14 was missing C2. We placed the component on ourselves. |
| + | |||
| + | = Board 2 = | ||
| + | |||
| + | *Individual channel 15 had 2 RBi's instead of an RBi and a CBi. We replaced the wrong RBi with the correct CBi. | ||
| + | |||
| + | = Board 3 = | ||
| + | |||
| + | *Individual channels 11 and 15 had 2 RBi's instead of an RBi and a CBi. We replaced the wrong RBi with the correct CBi. | ||
| + | *The 100k resistor in the voltage reference was actually a 442k resistor. | ||
| + | *The voltage regulator for AMPREF had the wrong pin out in our drawings. We rotated it so that VCC_VRef moved to where AMPREF was and a wire attaches from AMPREF to where VCC_VRef was. | ||
Revision as of 20:14, 12 April 2012
Here is a list of changes made to the boards received from Sierra Circuits.
Board 1
- Individual channel 14 was missing C2. We placed the component on ourselves.
Board 2
- Individual channel 15 had 2 RBi's instead of an RBi and a CBi. We replaced the wrong RBi with the correct CBi.
Board 3
- Individual channels 11 and 15 had 2 RBi's instead of an RBi and a CBi. We replaced the wrong RBi with the correct CBi.
- The 100k resistor in the voltage reference was actually a 442k resistor.
- The voltage regulator for AMPREF had the wrong pin out in our drawings. We rotated it so that VCC_VRef moved to where AMPREF was and a wire attaches from AMPREF to where VCC_VRef was.