Difference between revisions of "Fiber Splicing"
Jump to navigation
Jump to search
| Line 5: | Line 5: | ||
====Ferrules==== | ====Ferrules==== | ||
| − | The ferrules are made of quartz, and are V shaped so that they make a hollow square | + | The ferrules are made of quartz, and are V shaped so that they make a hollow square cross-section when mated. This is so the fiber fits between them snugly while it is being fused. |
<gallery> | <gallery> | ||
Revision as of 20:27, 20 November 2012
Equipment
Splicing Unit
Ferrules
The ferrules are made of quartz, and are V shaped so that they make a hollow square cross-section when mated. This is so the fiber fits between them snugly while it is being fused.
A 2x2 mm square waveguide, 2 ferrules, and heat-shrink used to mount the ferrules and supports to the collars
Splicing Collars
Top collar, with ferrule and support mounted.
Bottom collar, with ferrule and support mounted.
Fibers
Lamp
- The lamp used in the fiber splicing unit is a 25 volt - 250 watt AV/Photo lamp.
Setup
Results
- Testing
- New Collar Design